Search
Close this search box.
Search
Close this search box.
YWGS-13X4000 DAC360T​-Hydraulic Swing Beam Shearing Machine

YWGS-13X4000 DAC360T

Max cutting thickness: 13mm
Max cutting length: 4000mm
Controller: DELEM DAC-360T

Performances and Features

High machining precision

The operation is simple

Low noise

Smooth movement

DELEM-DAC-360T-CNC-Controller

DELEM DAC-360T CNC Controller

  • Panel based housing
  • Bright LCD screen
  • Back / front gauge control
  • Retract function
  • Cutting angle and gap control
  • Stroke length limitation
  • Manual movement of all axes
  • Force control
  • Sheet thickness measurement
  • RTS, Return to Sender function
  • Second servo axis (DAC-362T)
  • Sheet support
Roller-Feeding-Workbench

Roller Feeding Workbench

Roller on the workbench can reduce friction and protect the workpiece surface; delicate design is convenient for cutting petty materials by hand.

Safety-Fence

Safety Fence

Protective guards on each side can protect the operator’s safety, and can clearly see the shearing situation, which is safe and convenient.

Presser

Presser

The pressing device adopts integral circuit and independent parallel pressing cylinder. When the sheet metal is uneven, it can be freely expanded and compressed on the sheet metal, and the pressing force can also be adjusted with the sheet material and thickness, without damage to the plate surface.

USA-Sunny-Pump

SUNNY Pump

American world-famous brand for hydraulic pump performs well and provides great power for the whole hydraulic system.

HIWIN-Ball-Screw-&-Linear-Guide12

HIWIN Ball Screw & Linear Guide

High performance decelerating motor, precision HIWIN ball screw and dual linear guide rail are adopted for CNC rear stop device, and the transmission positioning accuracy is less than ±0.1mm.

Rear-Pneumatic-Sheet-Support-(Optional)

Rear Pneumatic Sheet Support (Optional)

Rear pneumatic support system provides support and allows more precise cuts by keeping the material lifted throughout the cut, avoiding hanging down the wide and thin sheets.

Not sure which machine is right for your product?

 Let our knowledgeable sales team guide you in selecting the most suitable
solution for your needs.

Controller (Optional)

E21
ESTUN E21S
  • The control behind;
  • General motors or inverter control;
  • Intelligent positioning;
  • Two programmable digital output;
  • Artifacts count;
  • Step 40 program storage, each program is 25;
  • Unilateral positioning;
  • Concession function;
  • A key to parameter backup and recovery;
  • Metric system;
  • Chinese/English.
E200P
ESTUN E200PS
  • LCD display, 240X128;
  • A multi-step programing to run automatically, positioning in a row;
  • Automatic way to avoid the backgauge with the expected workpieces interference;
  • One-way location, the elimination of screw drive space;
  • Duke/ British system is available;
  • Chinese and English menu operation;
  • Automatic compensation of the location;
  • Adequate storage space for the processing procedures;
  • Memory function of power off action.
DELEM-DAC310S
DELEM DAC310S
  • Bright LCD 275×48 display
  • Backgauge control
  • Gap control
  • Stroke length limitation
  • Actual and Programmed position visualization
  • Stock counter
  • Programmable up to 100 steps
  • Panel-based housing
  • Servo control/unipolar/AC two-speed control
DELEM-DAC360S
DELEM DAC360S
  • Panel control
  • High brightness LCD display
  • Back gauge control
  • Concession function
  • Shear angle control
  • Shear gap control
  • Shear stroke contro
  • Pressure control
  • Each axis moved manually
DELEM-DAC360T
DELEM DAC360T
  • Panel based housing
  • Bright LCD screen
  • Back / front gauge control
  • Retract function
  • Cutting angle and gap control
  • Stroke length limitation
  • Manual movement of all axes
  • Force control
  • Sheet thickness measurement
  • Return to Sender function
  • Sheet support
ESA-S625
ESA S625
  • All-in-one monoboard
  • Resistive type 7 ”Touch color screen
  • Management of up to 3 axes
  • Simple programming even for complex cuts
  • 16 + 12 I / O with integrated PLC
  • 1 Ethernet port
  • 1 RS-232 serial port
  • 1 USB 2.0 port
  • 2 analog inputs + 2 analog outputs
  • Available in 25 languages

Main Technical Parameters

Model Cutting Thickness Cutting Length Cutting Angle Backgauge Range Travel Time Motor Power Dimension
Type (mm) (mm) (°) (mm) (T/min) (kW) LxWxH(mm)
6 x 3200 6 3200 0.5-2 20-600 ≥15 7.5 3820*1580*2100
6 x 4000 6 4000 0.5-2 20-600 ≥13 7.5 4620*1630*2160
6 x 6000 6 6000 0.5-2 20-800 ≥8 11 6530*2075*2610
8 x 3200 8 3200 0.5-2 20-600 ≥15 11 3820*1580*2100
12 x 3200 12 3200 0.5-2.5 20-800 ≥8 18.5 3800*2000*2450
12 x 4000 12 4000 0.5-2.5 20-800 ≥7 22 4600*1960*2510
13 x 8000 13 8000 0.5-2.5 20-800 ≥6 30*2 8600*2900*3100
16 x 3200 16 3200 0.5-2.5 20-800 ≥8 22 3940*1960*2400
16 x 4000 16 4000 0.5-2.5 20-800 ≥7 22 4750*2010*2640
20 x 2500 20 2500 0.5-3 30-800 ≥8 30 4750*2010*2640
20 x 4000 20 4000 0.5-3 30-800 ≥6 37 4660*2200*2710
25 x 2500 25 2500 0.5-3.5 40-800 ≥6 37 3450*2700*2900
Note: The above parameters are for reference only and are subject to change without notice.
After-Sales Service

After-Sales Service Engineers & Sales Cooperate

  • Training how to install the machine, and how to use the machine.
  • Engineers available to service machinery overseas.

Pre-Sales Service Technical & Sales Teamwork

  • Inquiry and consulting support.
  • Suggest solution.
  • View our Factory.
Pre-Sales Service Technical & Sales Teamwork​

Get A Quote

If you would like to have a question then get in touch today, we are ready to assist 24/7.